• slider inf tech 1
  • slider inf tech 2
  • slider inf tech 3

Technical info

Basic parametres which determine functional and aesthetic properties of the clinker products include frost resistance, water absorbability, resistance to stains, impact resistance, bending strenght, chemical resistance and resistance to agents of domestic use. Additionally, floor and stair profiles should be anti-slip.


Applicable laws and regulations set minimum parametres, which all clinker products must follow. KING KLINKER products not only meet the EU and American standards but are also superior to them. For example, bending strenght is twice higher than required and so is chemical resistance, absorbability is circa 3%. The dynamic slip ratio is equal for both wet and dry surfaces.


Our products are environmental friendly. They do not release cadmium and lead in the course of exploitation as a result they can be laid on in both households and food industry structures or industrial centres.


High frost resistance has been approved by the Institute of Ceramics and Construction Materials. Test results of our thin bricks are far better than standard norms (50-100 cycles) because after 1000 cycles no damages were reported.


Specification Test Result
Efflorescence ASTM C67-18 None present
Chipping ASTM C1088 None present
Size ASTM C216 Meets the Standard
Warpage ASTM C216 Meets the Standard
Absorption ASTM C67-18 ~3%
Saturation Coefficient ASTM C1088 ~3%
Freeze/Thaw ISO……… Passed 1000 Cycles
Chemical Resistance ISO……… Not Affected
Precast Certification ASTM C666 Test is in Progress


inf t1inf t2inf t3





NOTE! This site uses cookies and similar technologies.

If you not change browser settings, you agree to it.

I understand